I always wonder what my customers are up to and sometimes I am lucky enough to find out. Here are a couple of projects done by a customer using some adjustable plastic straps (I am a shiny metal nut so I don’t carry plastic findings at this time). This same type of project can, of course, be made using metal slides to create an adjustable straps.

The not so new fad are these clever FOB sets. They can be used as an extension of your key chain for easy identification or, if long enough, as an easy way to carry your keys (anything in my hands are immediately placed somewhere and never to be found.)

Some people also use the FOB kit to create the strap part of the wristlet.

The FOB kit is easily assembled. To make a basic fob, choose your choice of 1.25″ cotton webbing. (For more personality, sew a ribbon onto the cotton webbing.)

Fold the webbing in half (if you added ribbon, make sure the ribbon faces outwards.)

Then, sandwich the webbing inside the flat area of the Key Fob Hardware.

Use pliars to close shut. (You may want to protect the metal by covering it with scrap fabric to prevent the pliars from scratching it.)

It takes practice but the end result is your own very key FOB.

If you don’t feel like making one (or perhaps you don’t have all those unique webbing, ribbons, or embroidery machine, check out Paper on Parade on Zibbet. She has a great selection of sizes and styles that you’ll love.

I love it when stores ship items at reasonable rates (hence the reason why I do the same). So, when I was looking for some 100% cotton yarn and found Create for Less, I was ecstatic. Their shipping prices are very reasonable and are based on the total price of your order. If you purchase $100 or more, shipping is free.

¹Standard shipments to AK, HI and PR add $10.00.

Now, I am crocheting away!

(P.S. I’ve included my affiliate link. Would you mind feeding my yarn addiction

I’ve been wanting to make some ribbon belts to match my Josie Cloche and was about to purchase 1.5″ d rings, since I do not yet supply them in my Tantalizing Stitches store. However, I got to thinking, why not try the 1.5″ rectangle rings? Well I did and I love them. Take a look.

Aren’t these little magnets cool? You can make a closure and never see it. But…. how do you install them?????

Well, I was going to create an instruction on how to do this but Linda Matthews has done such a great job that I will just direct you to her site here and here.

Also, Christine suggests another way to install invisible magnetic snaps here.

If you have additional suggestions on how to install these magnets please let me know. When I get enough suggestions, I will do a round up on the different techniques.

I often receive questions about the best way to install pronged magnetic snaps. To this end, I have written many emails and messages about the same subject but failed to make it easy on both you and me by posting my answer online. Awhile ago I re-wrote the directions on Answers.com and thought it would be even easier if I provided this information on my own website.

I wrote this answer to the question:
How do you sew magnetic snaps onto a purse or handbag?
There are a couple of different types of magnetic snaps but the most popular type is the prong type. One set comes with a female part (its magnetic with a dimple in the middle), a male part (non-magnetic and fits in the female part), and two washers to secure the parts in place.

The instructions really depend on where you decide to install this snap. In general, make sure that you only intend to have the magnetic side showing as the opposite side looks very unappealing. Most people install these into the lining of the bag so if you do, make sure to install these before you sew the lining on.

First, you need to determine where you want to install the snaps. To do this, align the washers on the fabric where you want your snap and place a mark on the back side of your fabric. These marks are where you will make slits so that the prongs of the snaps can fit in place.

Second, make slits on the marks you made. I suggest making the slits smaller than necessary because if you make them too large, your snaps will move around and will not be so secure. Also, many people apply different techniques to prevent ripping of the slits. (The tear is caused by the pulling apart of the strong magnetic snaps – the tear is usually at the bottom of the slit). Some people treat the slits as button holes and sew the slits that way. If you do this, make sure that sewing you do cannot be seen and is hidden behind the snap.

Other techniques include applying interfacing (I suggest the iron on). If you do this, I suggest ironing the interfacing on and then cutting the slits.

I’ve also used plastic canvas as support. I cut a piece of plastic canvas that is larger than the washer and stick the piece in between the fabric and washer.

As the previous author suggested, Fray Check could also be used. Just make sure that you don’t end up gluing the wrong things together.

Third, install the female or male part by placing the piece on the good side of your fabric so that the prongs end up on the back side of the fabric. Then, place the washer over the prongs and fold the prongs toward the center. I suggest using pliers to fold the prongs over.

Make sure everything is nice and snug and repeat to install the second part.

Win Tags-n-Stones beautiful jewelry!